bcom-power-supply-for-mettler-toledo-bcom-bcoms-barcode-scale, bcom-power-supply-for-mettler-toledo-bcom-bcoms-barcode-scale, /for-mettler-toledo252
EN
This BCom power supply board is a module custom-designed for the Mettler Toledo BCom and BComs series retail barcode labeling scales. Installed within the scale's base, it converts standard AC mains power into multiple regulated DC outputs to power the main control board, load cell, thermal printing assembly, operator and customer LCD displays, membrane keypad, RS232 serial port, and Ethernet/USB communication modules. Its design is fully compatible with the BCom/BComs series' original low-power standby management system, supporting low idle power consumption and ensuring reliable wake-up upon key presses.
SOSTAR presents the BCom Power Supply for Mettler Toledo BCom BComs Barcode Scale, a reliable and robust replacement designed for demanding retail and industrial weighing environments. Engineered to meet strict compatibility standards, this BCom scale replacement power unit offers stable voltage delivery, enhanced durability, and simplified installation—ensuring uninterrupted scale operation and protecting your measurement accuracy
Product Features and Specifications
The SOSTAR BCom Power Supply for Mettler Toledo BCom BComs Barcode Scale is crafted as a direct BCom scale replacement that fits seamlessly into existing Mettler Toledo installations. As a carefully designed Mettler Toledo power supply alternative, this unit delivers consistent performance under varied load conditions. Featuring precise output regulation, overcurrent protection, and thermal safeguarding, the BCom power supply preserves sensitive scale electronics while preventing downtime
Key technical specifications include stable DC output with low ripple characteristics tailored to barcode scale spare parts requirements. The unit supports a broad input voltage range to accommodate global power environments, and its surge tolerance protects downstream scale circuits. SOSTAR’s in-house RD team optimized circuit layouts to ensure electromagnetic compatibility and minimize interference with weighing and barcode scanning functions
Innovation and Design Advantages
SOSTAR’s BCom Power Supply for Mettler Toledo BCom BComs Barcode Scale incorporates multiple innovation points that distinguish it from generic alternatives. First, the Mettler Toledo power supply unit leverages optimized thermal management to promote reliability in high-ambient-temperature installations. The thermal design reduces stress on electronic components, extending life expectancy and ensuring consistent delivery of power for barcode scale spare parts dependent on precise voltage
Third, SOSTAR’s commitment to compatibility results in a Mettler Toledo power supply that mirrors key mechanical and electrical interfaces of OEM units, ensuring straightforward replacement without the need for adaptor cables or reconfiguration. This Mettler Toledo power supply high-compatibility power unit approach decreases installation time and reduces risk of user error during field replacement
Technical Advantages and Quality Assurance
SOSTAR’s in-house RD capabilities enable focused improvements across the BCom Power Supply for Mettler Toledo BCom BComs Barcode Scale. Each unit undergoes comprehensive verification against performance metrics customary for Mettler Toledo power supply replacements, including output regulation, transient response, and noise filtering
Compatibility and Installation
Ease of installation is a hallmark of the SOSTAR BCom Power Supply for Mettler Toledo BCom BComs Barcode Scale. Designed as a direct BCom scale replacement, the power unit aligns with OEM connector layouts and mechanical fastenings to support faster swaps with minimal technical adjustments. Technicians can replace the power unit with standard tools and without reprogramming, minimizing service labor and store disruption
Why Choose SOSTAR
Guangzhou SOSTAR Smart Technology Co., Ltd. specializes in barcode scale spare parts, producing reliable components including print heads, rollers, sensors, and keyboards. The BCom Power Supply for Mettler Toledo BCom BComs Barcode Scale is an extension of SOSTAR’s mission to deliver high-quality replacements that meet the needs of global markets
|
Type |
BCom Power Supply |
|
Model Number |
PTOLBCOM |
|
Model Name |
For Mettler Toledo BCom |
| Warranty |
3 Months warranty |
|
Stock |
|
|
Quality |
Excellent 100% Tested |
|
Packing |
Bubble Bag + Carton Box |
|
Used for |
For Mettler Toledo BCom BComs Scale |
|
Place of Origin |
Guangdong, China |
|
Brand Name |
So Star |
|
Material |
PCB |
|
Condition |
New |
OEM-Compatible Mounting Layout and Multi-Rail DC Output for BCom / BComs
This product is precision-manufactured to strict OEM electrical and mechanical specifications, covering mounting hole locations, connector pinouts, multi-rail DC output ratings, and low standby power consumption. It fits perfectly into the base chassis of Mettler Toledo BCom and BComs barcode scales; field technicians can quickly replace the circuit board without the need for cutting, soldering, or chassis modification.
Integrated EMI Filtering and Comprehensive Electronic Protection
This switching power supply board utilizes high-frequency transformers, low-ESR electrolytic capacitors, and robust built-in protection circuitry. Integrated EMI filtering suppresses electrical noise from the commercial power grid, preventing fluctuations in weight readings caused by electromagnetic interference. The unit features over-current, over-voltage, short-circuit, and over-temperature protection; in the event of an overload or short circuit, the power supply automatically cuts off the output, protecting the mainboard, load cell, thermal printhead, and communication interfaces from permanent damage. BCom / BComs scales often operate continuously during business hours, leading to heat accumulation within the base chassis; additionally, grease vapors and fine dust can adhere to the PCB, reducing heat dissipation efficiency. This power supply board is designed to withstand the temperature and humidity ranges typical of retail environments and is built to endure thermal cycling, ensuring stable and reliable operation. Whether installed at a front-end weighing station or a back-room pre-packaging area, this replacement board eliminates power instability, ensuring reliable performance across weighing, label printing, display, and data communication functions.
Dynamic Load Regulation Optimized for Printing and Multi-Port Communication
The multi-output power architecture maintains stable DC voltage even during rapid load fluctuations. When the thermal printhead activates to print a label, it draws a high instantaneous peak current; the power supply is capable of handling these sudden surges without experiencing voltage drops. It supports the BCom series' low-power standby mode and ensures reliable wake-on-key functionality. A stable power supply guarantees consistent load cell signal acquisition and reliable data transmission across Ethernet, RS232, and USB interfaces, thereby preventing issues such as erratic weight fluctuations or intermittent communication failures often encountered during peak retail hours. The accumulation of dust and grease can gradually impair the heat dissipation performance of the PCB (Printed Circuit Board); however, the layout of this power board preserves ample airflow channels within the scale housing. Unlike inexpensive, generic power boards that utilize inferior capacitors—which are prone to rapid bulging or leakage under sustained thermal stress—this BCom power module demonstrates superior longevity under the continuous, moderate-load operating conditions typical of retail environments.
Are you a manufacturer?
Yes. We are manufacturer for spare parts for thermal label printer and label scale. With own R&D department, can according to market needs to design and develop new parts to the market.
What product we can provide ?
As a global professional manufacturer of printheads, So-STAR has more than 20 years of experience in design, development and customs export, specializing in thermal printheads, Barcode printer spare parts, Electronic scale parts, POS printer spare parts. We provide one-stop product services and also can provide technical support.
Why should you buy from us not from other suppliers?
As a global professional manufacturer of printheads, So-STAR has more than 20 years of experience in design, development and customs export, specializing in thermal printheads, Barcode printer spare parts, Electronic scale parts, POS printer spare parts. We provide one-stop product services and also can provide technical support.
What is the MOQ for each item?
Our MOQ can be 1 pcs. Most of the products have large stocks available. Normally we can send goods out in your order day.
What's your product warranty time?
For label scale, normally 1 year. For other parts, normally 6 month. For print head, normally 3 month. We also support prolong the warranty time, pls contact our sales team to discuss. We are open to discuss about it.
Do you provide customize services ?
Yes, of course we do. We warmly welcome clients with customization needs to contact us. This allows us to better understand the market and work together to develop products that meet market demands.
How can we guarantee quality?
We strictly control every detail of production. In addition to the quality inspections that are basically required in production, we also have a quality inspection department with over 10 technic persons, and each product has a quality inspection record.
Can I get some samples? Are they free?
Of course, you can get samples for testing before bulk order, samples are not free. But the cost can be deducted after mass order.
This BCom power supply board is a module custom-designed for the Mettler Toledo BCom and BComs series retail barcode labeling scales. Installed within the scale's base, it converts standard AC mains power into multiple regulated DC outputs to power the main control board, load cell, thermal printing assembly, operator and customer LCD displays, membrane keypad, RS232 serial port, and Ethernet/USB communication modules. Its design is fully compatible with the BCom/BComs series' original low-power standby management system, supporting low idle power consumption and ensuring reliable wake-up upon key presses.