Focus on spare parts for label scale and thermal printer

cs200e-printhead-for-hiti-cs200e-cs220e-cs260e-cs290e-id-card-printer, cs200e-printhead-for-hiti-cs200e-cs220e-cs260e-cs290e-id-card-printer, /-id-card-printer-parts-
cs200e-printhead-for-hiti-cs200e-cs220e-cs260e-cs290e-id-card-printer, cs200e-printhead-for-hiti-cs200e-cs220e-cs260e-cs290e-id-card-printer, /-id-card-printer-parts-
Inquiry
cs200e-printhead-for-hiti-cs200e-cs220e-cs260e-cs290e-id-card-printer, cs200e-printhead-for-hiti-cs200e-cs220e-cs260e-cs290e-id-card-printer, /-id-card-printer-parts-
Inquiry

CS200e Printhead for HITI CS200E CS220E CS260E CS290E ID Card Printer

Still frustrated by dull, striped ID cards printed by your HiTi CS-E series printers? If your output suffers from horizontal white lines, faded portraits, uneven color gradations, blurry QR codes, or missing parts, our CS200E compatible printhead is a reliable and cost-effective solution.

Request a Quote
  • Overview
  • Specifications
  • Advantages
  • FAQ

Overview

As the core thermal component of the HiTi CS200E/CS220E/CS260E/CS290E dye-sublimation card printers, this printhead meticulously replicates the original OEM dimensions, pin definitions, heating point arrangement, and electrical specifications. No wire cutting, driver resetting, or firmware calibration is required. Simply remove a few screws, replace the old printhead, and connect the flat cable to restore stable, high-definition full-color card printing in minutes

Compatible Printers: HiTi CS200E / CS220E / CS260E / CS290E Dye-Sublimation ID Card Printer
Printing Technology: Thermal Diffusion Transfer D2T2
Resolution: 300 DPI High Precision
Supported Card Size: Standard CR80 PVC Card 85.6×53.98mm
Heating Material: Wear-resistant Industrial Ceramic Heating Points
Connector: Original Standard Multi-Pin Flat Cable
Structure: Integrated Dual Aluminum Heat Sink + Fixed Mounting Bracket
Application Scenarios: Employee ID Cards, Student ID Cards, Access Control RFID Cards, Government Visitor Passes, Bank Magnetic Strip Cards, Supermarket Membership Cards, Professional Card Printing Service Shops

SOSTAR presents the CS200e Printhead for HITI CS200E CS220E CS260E CS290E ID Card Printer, a precision-engineered replacement designed to restore peak performance for professional ID card production. This CS200e printhead solution addresses the needs of organizations that depend on reliable print quality, consistent throughput, and minimal downtime. As specialized ID card printer parts, the CS200e printhead from SOSTAR HITI CS200e printhead offers thermal printhead replacement performance, optimized durability, and compatibility that makes it an essential component for long-term printer maintenance strategies

Product overview and compatibility

The SOSTAR CS200e printhead is purpose-built for a family of HITI devices, including HITI CS200e printhead-compatible models CS200E, CS220E, CS260E, and CS290E. When users search for HITI CS200e printhead options or ID card printer parts, they expect exact-fit replacements that match OEM specifications. This HITI CS200e printhead provides that exact fit, enabling technicians and administrators to perform a smooth thermal printhead replacement process that minimizes service interruptions and maintains image integrity. Whether used in access card issuance, student ID programs, corporate badge systems, or membership card production, the CS200e printhead is a dependable choice

Key features and technical advantages

The SOSTAR CS200e printhead offers multiple technical advantages tailored to high-volume and mission-critical environments. As a thermal printhead replacement, it delivers high-resolution printing with precise dot placement, ensuring crisp text, sharp bar-codes, and accurate color reproduction on PVC and composite card surfaces. The CS200e printhead supports consistent color density across long print runs, reducing the need for reprints and lowering overall operational costs

Other standout features include improved thermal stability, reduced susceptibility to image banding, and enhanced alignment tolerance that ensures consistent edge-to-edge coverage. These advancements mean that the CS200e printhead replacement reproduces fine-detail security elements such as micro-text, guilloche patterns, and secure holographic overlays with high fidelity

Performance and reliability

When implementing a thermal printhead replacement like the CS200e printhead, reliability and predictable performance are paramount. SOSTAR’s CS200e printhead is manufactured under strict quality controls to meet rigorous longevity standards. Each unit undergoes testing for electrical continuity, thermal response, and mechanical alignment before shipment to ensure that the HITI CS200e printhead will perform consistently from the first card to the lastB

Operational benefits include faster warm-up times, stable print speeds, and reduced thermal cycling variations. For fleet operations that maintain multiple HITI devices, deploying SOSTAR CS200e printhead units as part of a proactive maintenance kit can prevent unexpected failures and keep ID card printer parts inventory predictable

Applications across industries

The CS200e printhead serves a broad range of application areas where reliability and print quality are critical. Use cases include:

- Corporate ID and access control: High-resolution badges with embedded bar-codes and magnetic strips require precise printing that the CS200e printhead consistently supplies

- Education and student identification: Durable student IDs and library cards benefit from the CS200e printhead’s consistent color output and image stability

- Government and municipal services: Official identification and permits demand secure, legible prints; the CS200e printhead supports high-fidelity reproduction of security features

SOSTAR leverages modern manufacturing techniques and material science to innovate within the ID card printer parts market. The CS200e printhead incorporates thermal element patterning that reduces hotspot formation and limits thermal stress. This results in lower failure rates and extended mean time between replacements

SOSTAR’s commitment to quality is reflected in the testing regimen for the CS200e printhead, which includes simulated production cycles, thermal endurance trials, and electrical stress tests. These measures ensure that the CS200e printhead replacement withstands the demands of high-volume printing environments

Installation, maintenance, and support

Replacing the HITI CS200e printhead with the SOSTAR CS200e printhead is designed to be a straightforward maintenance task for trained technicians. SOSTAR HITI CS200e printhead provides installation guidance, torque specifications, and recommended cleaning procedures to maximize the lifetime of the CS200e printhead

For procurement and logistics, SOSTAR offers dependable supply channels and packaging that safeguards each CS200e printhead from electrostatic discharge and mechanical damage during transit

Specifications

Type

CS200E Printhead

Model Number

UHIT200e

Model Name

For HITI CS200E

Warranty

3 Months warranty

Stock


Ready Stock

Quality

Excellent 100% Tested

Packing

Bubble Bag + Carton Box

Used for

For HITI CS220E CS290E CS260E Printer

Place of Origin

Guangdong, China

Brand Name

So Star

Material

Stainless Steel & PVC

Condition

Original

Advantages

Fully Compatible
100% compatible with HiTi CS200E, CS220E, CS260E, and CS290E card printers. Integrated heat sink, flat cable connector, and mounting latches are fully compatible with original parts.

300DPI High-Precision Ceramic Heating Points for Vivid and Lifelike Colors
The 300DPI industrial-grade ceramic heating array delivers delicate skin tones, smooth color gradations, and clear small text, logos, barcodes, and micro-security markings on standard CR80 PVC cards. Even after thousands of full-color prints, there is no graininess or banding, meeting official card visual standards.

Gold-Plated PCB and Dual Aluminum Heat Dissipation Structure
Gold-plated contacts effectively prevent oxidation, dust, and ink banding residue, avoiding intermittent printing omissions due to poor contact. Dual aluminum heat sinks dissipate heat quickly during batch printing, preventing the heating points from burning during prolonged continuous operation. A reinforced frame prevents deformation during disassembly and installation.

FAQ

Are you a manufacturer?

Yes. We are manufacturer for spare parts for thermal label printer and label scale. With own R&D department, can according to market needs to design and develop new parts to the market.

What product we can provide ?

As a global professional manufacturer of printheads, So-STAR has more than 20 years of experience in design, development and customs export, specializing in thermal printheads, Barcode printer spare parts, Electronic scale parts, POS printer spare parts. We provide one-stop product services and also can provide technical support.

Why should you buy from us not from other suppliers?

As a global professional manufacturer of printheads, So-STAR has more than 20 years of experience in design, development and customs export, specializing in thermal printheads, Barcode printer spare parts, Electronic scale parts, POS printer spare parts. We provide one-stop product services and also can provide technical support.

What is the MOQ for each item?

Our MOQ can be 1 pcs. Most of the products have large stocks available. Normally we can send goods out in your order day.

What's your product warranty time?

For label scale, normally 1 year. For other parts, normally 6 month. For print head, normally 3 month. We also support prolong the warranty time, pls contact our sales team to discuss. We are open to discuss about it.

Do you provide customize services ?

Yes, of course we do. We warmly welcome clients with customization needs to contact us. This allows us to better understand the market and work together to develop products that meet market demands.

How can we guarantee quality?

We strictly control every detail of production. In addition to the quality inspections that are basically required in production, we also have a quality inspection department with over 10 technic persons, and each product has a quality inspection record.

Can I get some samples? Are they free?

Of course, you can get samples for testing before bulk order, samples are not free. But the cost can be deducted after mass order.

CS200e Printhead for HITI CS200E CS220E CS260E CS290E ID Card Printer

Still frustrated by dull, striped ID cards printed by your HiTi CS-E series printers? If your output suffers from horizontal white lines, faded portraits, uneven color gradations, blurry QR codes, or missing parts, our CS200E compatible printhead is a reliable and cost-effective solution.

Request a Quote

Featured Products

cs200e printhead for hiti cs200e cs220e cs260e cs290e id card printer-2

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000