Focus on spare parts for label scale and thermal printer

sm500-printhead-for-digi-sm500-mk4-barcode-scale, sm500-printhead-for-digi-sm500-mk4-barcode-scale, /for-digi
Inquiry
Inquiry

SM500 Printhead for DIGI SM500 MK4 Barcode Scale

The SM500 MK4 thermal printhead is an industrial-grade, long-life heating element spare designed specifically for the high-speed DIGI SM500 MK4 retail barcode scale platform. This ceramic thermal assembly is suitable for the rugged wide-format print chamber of the MK4 generation weighing terminal, providing stable, high-quality prints at 203 dpi, with a maximum print speed of 150 mm/s and a rated print distance of up to 150 km with proper maintenance.

Request a Quote
  • Overview
  • Specifications
  • Advantages
  • FAQ

Overview

In heavy-duty wide-format print chambers, after long, multi-shift production cycles, the reinforced, wear-resistant ceramic enamel gradually accumulates stubborn adhesive residue, fine paper scraps, and airborne grease. This progressive wear leads to noticeable printing defects: permanent vertical blank streaks on wide-format labels and receipts, fading of nutrient information text, uneven print density during high-speed batch printing jobs, and inconsistent barcode scanning performance even after regular cleaning and print density adjustments. This replacement printhead uses the same 26-pin connector layout, heating point resistance curve, mounting dimensions, and high-speed drive timing parameters as the original manufacturer. It is fully compatible with the DIGI SM500 MK4 native firmware and can restore factory-quality, clear wide-format label printing.

Specifications

Type

SM500 Printhead

Model Number

TDIGMK4

Model Name

For DIGI SM500

Warranty

3 Months warranty

Stock


Ready Stock

Quality

Excellent 100% Tested

Packing

Bubble Bag + Carton Box

Used for

For DIGI SM500 MK4 Scale

Place of Origin

Guangdong, China

Brand Name

So Star

Material

Stainless Steel

Condition

New

Advantages

Compatibility with DIGI SM500 MK4 Series Models

Calibrated to original OEM mechanical and electrical specifications. Print width, micro-heating dot matrix layout, and mounting hole spacing are matched to the original DIGI SM500 MK4 thermal unit (part number: 0EX00401110080).

Heavy-duty reinforced ceramic glaze thermal structure optimized for high-speed industrial retail workflows

Utilizing a high-quality alumina ceramic substrate coated with an upgraded, thickened, wear-resistant glaze. Each micro-heating element undergoes rigorous resistance tolerance screening to ensure uniform heat distribution across the entire 80mm wide print area, preventing streaks or blotchy prints even under continuous, high-speed printing cycles. Its thermal profile has been finely tuned for the SM500 MK4 series' peak print speed of 150mm/s, ensuring high-contrast clarity for wide labels while achieving efficient passive heat dissipation. This extends the print length to 150km, meeting the printing needs of high-intensity environments in supermarkets and food factories. Whether installed on a benchtop weighing station or on a dedicated high-volume pre-packaging production line in the meat and bakery section, this reliable replacement printhead ensures that supermarket checkout scanners quickly recognize and scan every wide retail barcode generated. Reliable three-media print quality reduces waste of wide labels and receipt rolls and prevents long customer queues during peak shopping hours.

Corrosion-resistant 26-pin connector and built-in ESD-protected PCB for harsh food retail environments

Gold-plated socket contacts effectively resist oxidation caused by grease, moderate humidity, and fine paper debris in the supermarket fresh produce section, ensuring stable power and signal transmission even after numerous high-speed printing cycles. The printed circuit board integrates built-in electrostatic discharge protection, protecting delicate micro-heating points from electrostatic damage during field technician replacement. Inferior, low-cost aftermarket printheads typically exhibit problems such as connector pin corrosion, intermittent heating point failure, and print fading after a relatively short lifespan.

FAQ

Are you a manufacturer?

Yes. We are manufacturer for spare parts for thermal label printer and label scale. With own R&D department, can according to market needs to design and develop new parts to the market.

What product we can provide ?

As a global professional manufacturer of printheads, So-STAR has more than 20 years of experience in design, development and customs export, specializing in thermal printheads, Barcode printer spare parts, Electronic scale parts, POS printer spare parts. We provide one-stop product services and also can provide technical support.

Why should you buy from us not from other suppliers?

As a global professional manufacturer of printheads, So-STAR has more than 20 years of experience in design, development and customs export, specializing in thermal printheads, Barcode printer spare parts, Electronic scale parts, POS printer spare parts. We provide one-stop product services and also can provide technical support.

What is the MOQ for each item?

Our MOQ can be 1 pcs. Most of the products have large stocks available. Normally we can send goods out in your order day.

What's your product warranty time?

For label scale, normally 1 year. For other parts, normally 6 month. For print head, normally 3 month. We also support prolong the warranty time, pls contact our sales team to discuss. We are open to discuss about it.

Do you provide customize services ?

Yes, of course we do. We warmly welcome clients with customization needs to contact us. This allows us to better understand the market and work together to develop products that meet market demands.

How can we guarantee quality?

We strictly control every detail of production. In addition to the quality inspections that are basically required in production, we also have a quality inspection department with over 10 technic persons, and each product has a quality inspection record.

Can I get some samples? Are they free?

Of course, you can get samples for testing before bulk order, samples are not free. But the cost can be deducted after mass order.

SM500 Printhead for DIGI SM500 MK4 Barcode Scale

The SM500 MK4 thermal printhead is an industrial-grade, long-life heating element spare designed specifically for the high-speed DIGI SM500 MK4 retail barcode scale platform. This ceramic thermal assembly is suitable for the rugged wide-format print chamber of the MK4 generation weighing terminal, providing stable, high-quality prints at 203 dpi, with a maximum print speed of 150 mm/s and a rated print distance of up to 150 km with proper maintenance.

Request a Quote

Featured Products

sm500 printhead for digi sm500 mk4 barcode scale-2

Get a Free Quote

Our representative will contact you soon.
Email
Mobile
Name
Company Name
Message
0/1000